DEKKER PARTIAL WATER RECOVERY WATER SEALED LIQUID RING VACUUM PUMP SYSTEMS
Dekker Vacuum AquaSeal systems are available in capacities from 15-39,000 CFM and can be offered in a wide variety of materials for tough applications. AquaSeal partial recovery systems re-circulate about 50% of the seal-water, while fresh seal-water is added for make-up. Consideration must be given to heat build-up.
DEKKER NO WATER RECOVERY WATER SEALED LIQUID RING VACUUM PUMP SYSTEMS
Dekker Vacuum AquaSeal systems are available in capacities from 15-39,000 CFM and can be offered in a wide variety of materials for tough applications. AquaSeal no recovery systems operate as the name implies: water fed to the pump is discharged down the drain or used for another purpose.
DEKKER FULL WATER RECOVERY WATER SEALED LIQUID RING VACUUM PUMP SYSTEMS
Dekker Vacuum AquaSeal systems are available in capacities from 15-39,000 CFM and can be offered in a wide variety of materials for tough applications.
AquaSeal full recovery water sealed liquid ring vacuum pump systems recover and re-use close to 100% of the seal-water. Because of heat build-up, a heat exchanger needs to be used. However, if the separator tank is large and the pump is small, radiation can dissipate sufficient heat and the system could work without a heat exchanger.
PARTIAL WATER Features
- For applications where water contamination is not a problem but water saving features are desired. Part of the water discharged by the pump is re-circulated resulting in a reduction of 30-50% water usage
- Complete package design includes all necessary components
- Available in a wide choice of materials
- Custom design according to customers specifications are a Dekker specialty
- Electrical control panel, including skid wiring available as an option
- Available with either single-stage or two-stage liquid ring pumps
- Heavy-duty pump design requires minimum maintenance
- All pumps include mechanical shaft seals as standard
- Heavy-duty TEFC motors with service factor are included
NO WATER RECOVERY Features
- Our most economical package design for applications where plenty of water is available and water contamination is not a problem
- Complete package design includes all necessary components
- Available in a wide choice of materials
- Custom design according to customers specifications are a Dekker specialty
- Electrical control panel including skid wiring available as an option
- Available with either single stage or two stage liquid ring pumps
- Heavy-duty pump design requires minimum maintenance
- All pumps include mechanical shaft seals as standard
- Heavy-duty TEFC motors with service factor are standard
FULL WATER RECOVERY Features
- Designed to be environmentally friendly and eliminate pollution
- Complete package design includes all necessary components
- Available in a wide choice of materials
- Control valves and instrumentation are available for fully automatic operation
- Custom design according to customers specifications are a Dekker specialty
- Electrical control panel, including skid wiring available as an option
- Available with either single-stage or two-stage liquid ring pumps
- Heavy-duty pump design requires minimum maintenance
- All pumps include mechanical shaft seals as standard
- Available with either shell & tube or plate type heat exchangers for maximum heat transfer efficiency and minimal cooling water requirements
INTERESTED IN THIS PRODUCT?
Get In Touch
For any general questions about our products or services, please fill out the form below and we will get back to you as soon as possible.
"*" indicates required fields